warning
Indicative image
The image is indicative, the article may vary by products of equal or greater size, color, etc.
- New
Need help? Contact us through WhatsApp
Lime scale remover for all types of cooling circuits, exchangers, mechanisms, pumps, propellers or engine tails. Suitable for aluminum and bronze. It does not damage rubbers, joints or seals. No unpleasant smell. Recommended by mechanical experts for outboard and inboard motors.
Instructions for use (by immersion): for small components, immerse them directly into a container with DE-20. It can also be used by completely filling the cooling system and letting it act. Instructions for use (by recirculation). Outboard motor: mix in a bucket of DE-20 with fresh water and place it under the propeller. Start the engine and let it absorb the mixture through the water intake and recirculate for 15 minutes. Inboard Engine: A pumping system is needed to inject DE-20 and recover it for recirculation. It is recommended to dilute DE-20 from 25-50% with fresh water, depending on the amount of lime scale and not to exceed 45 minutes of application. The mixture has a red color that disappears when deactivated.
No customer reviews for the moment.